C-Sharp® All Ceramic Sharpener – Medium 600 / Fine 800

User Guide 1. Ceramic V-grooves (600 grit): 17º, 20º, 25º and 30º Holding the knife with your dominant hand, and using the other hand to hold the sharpener: pull the knife through the desired angle slot. Use moderate pressure. Rinse blade after sharpening. 2. Ceramic Benchstone: The medium (800) grit ceramic element should be used in a benchstone type fashion, or like a butcher steel. The ceramic benchstone is harder than steel, will never wear out, and can be used often as the primary sharpening element of your C-Sharp®. The Ceramic Benchstone is also tapered for sharpening serrated knives. Eventually metal shavings will accumulate as dark streaks on the ceramic and will slow effectiveness. Clean with a Lansky® Eraser Block. 3. Sharpening Serrations: Sharpen one serration at a time by pulling the ceramic element against the grooved side of the serration. For larger serrations: use a rolling motion to sweep the corner of the sharpener from one side of the serration to the other. Repeat until serration is sharp then move to the next serration. Be Smart, Be Safe and Stay… An Edge Above the Rest®!

Features:

• 4 sharpening angles (17º, 20º, 25º, and 30º)
• 800 grit ceramic Benchstone for fine polishing and serrations
• 600 grit medium ceramic pull-through slots
• Durable metal casing
• 100% compatible with all Lansky® Controlled-Angle Systems & Turn Boxes

Specifications:

• Base/Handle Material: Metal
• Features: Lanyard Hole
• Sharpener Angle:
  • 17°
  • 20°
  • 25°
  • 30°
• Sharpener Material: Ceramic
• Uses:
  • Regular
  • Serrated
  • Filet