NitroFire Muzzleloader with 3.5-10×40 Scope – .50 Cal, 26″, Black Cerakote Barrel / Veil Cumbre Stock

Features:

• Built with a tapered and fluted ultralight chromoly steel barrel, delivering enhanced structural integrity and optimal weight reduction
• Elite XT™ System: Comes factory-equipped with the Traditions® Elite XT™ trigger system, which incorporates a manual cross-block safety alongside a rebounding hammer
• Safe Breech Access: The specialized Elite XT™ design lets you safely break open the rifle action while the cross-bolt safety remains fully engaged. This allows you to inspect the chamber, load the weapon, or unload it with an extra layer of mechanical security
• Polymer charge filled with clean-burning Hodgdon® Triple Eight powder
• Charges from the breech of Traditions NitroFire rifle
• Bullet loads from the muzzle
• Totally impervious to moisture and the elements
• Same tight tolerances and quality controls as loaded ammunition
• Fast, effortless loading and unloading
• Shooter inserts 209 shotgun primer (not included)

Specifications:

• Twist Rate: 1:24″
• Loading is as easy as 1-2-3:
  • 1. Load your saboted projectile, such as a Smackdown® Carnivore™ bullet, through the muzzle with your ramrod. Push it down the barrel and seat it on the shelf within the barrel. You’ll feel the bullet stop with resistance. This provides a consistent starting point every time.
  • 2. Break open the action on the NitroFire® with the release button located near the trigger guard and insert the Federal Premium® Firestick™ into the breech area.
  • 3. Place a 209 primer into the primer pocket of the Federal Premium® Firestick™. Close up the NitroFire® and your muzzleloader is fully loaded.